Vuzix M100 Product Guide - Manual (Page 18)

425PB0002-02
18
 Make an “S” bend in the display arm, as illustrated above. This will
help position the display in front of your eye and at the correct
angle.
 Clip the M100’s speaker into the mounting ring of the headband.
 Turn on your M100 by pressing the power button, the single button
along the bottom edge of the M100’s main body.
 Center the display in front of your eye, tilting it as required to
achieve a full view of the display.
 Once centered in front of your eye, slide the display arm back to
position the display approximately 1 inch (~25 mm) away from your
eye.
You can position the display further from your eye but doing so will reduce the image
size.
Finding the correct position may require
some trial and error adjustments,
possibly repeating some of the above
steps multiple times.
When correctly positioned you should
have a clear view of the entire display
area, surrounded by a black border.
The image is focused at approximately 10 feet (3 meters) so if you wear bifocal
prescription glasses, position the display over the distant viewing area.
PowerPak 3800
The M100 Smart Glasses contains an internal battery able to deliver 1 to 2 hours of
operation under normal use. Some functions such as camera operation and wireless