Vuzix M100 Product Guide - Manual (Page 17)

425PB0002-02
17
Display Adjustment
Positioning of the M100’s display is crucial to its effective use. It can be worn above,
below or directly in your line of sight, all of which are enabled through adjusting the
display arm and its tilting mechanism.
Note: The M100 Smart Glasses can be worn with or without
prescription eyeglasses.
Note: The following adjustments relate generally to the
headband mounting option. However, some of the
same principles and philosophies apply to other M100
mounting options.
The display can be adjusted in three ways; the length of the arm, the shape of the
arm and the angle of the display assembly. The arm slides in and out of the main
body, allowing for approximately one inch of adjustment. The display arm is also
flexible; enabling it to be bent with gentle curves for exact positioning. And lastly, the
display assembly or head can be tilted up 15° or down 15° for approximately 30 degrees
total to provide accurate alignment in multiple viewing positions.
Note: Many M100 users find an “S” bend, as shown in the
above middle illustration, to be a good starting point
in finding the position that works best for them.
The following instructions illustrate positioning the M100 using the headband for
right-eye viewing. The same general process can be employed when using the safety
glasses and for either right or left-eye viewing.