Vuzix M100 Product Guide - Manual (Page 15)

425PB0002-02
15
 Slide the adapter onto the safety glass stem, with the mounting
ring to the rear. ①
 Snap the M100’s speaker into the mounting ring. ②
 Rotate the display arm down and clip it into the adapter’s retainer
clip. ②
 Slide both the left and right ear hooks onto the stem far enough to
secure the glasses when worn. ③
 Finally, attach the rubber speaker cone over the lip of the
mounting ring (optional).
The arm tilt of the safety glasses is adjustable (as indicated in the below picture).
Most users find that the M100 is in the best position when both arms have been
adjusted down to the lowest setting, and the M100 is positioned higher in your line
of sight.
Please make sure that both arms are in approximately the same position, to ensure
that the M100 is level and comfortable.