Vuzix M100 Quick Start Guide - Manual (Page 9)

8
Vuzix 425PB0001-03
devices. The Smart Glasses Manager app will only run on Android versions 2.3.3
(Gingerbread) or newer.
The Smart Glasses Manager app runs in portrait mode only.
After running the application you must pair it first to your M100 to start using it.
Connecting an M100 to a Bluetooth-capable phone or tablet within the Manager app
The M100 is shipped with Bluetooth enabled by default to make the pairing process easier.
The M100 will be discoverable continuously until it is paired with a device. After a device
has been paired to the M100, a user can make the M100 discoverable again by holding the
M100’s Back/Select button.
- Ensure the M100 is currently discoverable by holding the Back button until you
see a message on the M100 screen saying it is in discoverable mode. If the
M100 is not discoverable, this will read “Entering discoverable mode for 300s”. If
the M100 was already discoverable this message will read “Already in
discoverable mode”.
- On the phone/tablet, search for the M100 and initiate the pairing process as
normal. (see Pairing the M100 to the smartphone for more details)
- Accept the pairing on the phone/tablet.