Vuzix M100 Quick Start Guide - Manual (Page 3)

2
Vuzix 425PB0001-03
Charging the M100 smart glasses
Before turning on your smart glasses for the first time charge it fully.
Connect the charge cable to the micro USB connector at the end of the M100. Use a
standard USB charger and plug the USB cable into its USB connector. Plug the charger
into a standard AC wall outlet or if you are using USB from your computer, turn your
computer on. The M100 turns on and indicates its charge state with the white LED flashing
if charging. When charging is complete the white LED will be remain solid if the M100 is
turned on.
M100 LED indicators
White LED:
- If the M100 is powered on while connected to an external power source the white LED
will remain solid when the M100 is fully charged.
o If the M100 is powered on, the user can fully operate the device even when it is
connected to an external power source.
- If the M100 is powered off, while connected to an external power source, and has a very
low battery, the white LED flashes 3 times every 5 seconds until it is able to regain some
charge.
o Once the battery is charged enough the white LED will flash once every 2
seconds while it is plugged in and charging.
o When the battery is fully charged the white LED will stay solidly on.
o Pressing the power button while looking into the display shows a battery charge
indicator for how full the battery is.
- If the M100 is powered off and not connected to an external charger, there are no LEDs
lit.
Blue LED:
- The blue LED is used for miscellaneous alerts and notifications
How to wear your M100
The M100 has a universal mount built into the main body and is designed around the
audio speaker. This mount will connect too many different head worn options. The M100
ships two mounting options; a
n “over the head” mounting option and a “safety glasses”
mounting option.