Visara 1199 TWA Mux - Manual (Page 12)

2-2 707026-001
Chapter 2: Customer Installation
Site Requirements
The installation site must provide a properly wired and grounded power outlet. Circuits
connected to air conditioners or other devices that generate significant transient electrical
noise should be avoided.
Electrostatic discharge in the vicinity of the unit should be minimized by avoiding high
resistance floor material and carpeting that does not have anti-static properties. You should
also avoid the use of plastic seats and covers, and avoid low humidity levels. The unit
should be located away from areas that generate electromagnetic interference (for example,
transformers, power distribution panels, and motors). The unit should not be installed
where the atmosphere contains corrosive elements that may damage the unit.
Cable runs should avoid areas that produce electromagnetic interference (for example,
near transformers, switching equipment, power distribution panels, and under carpets
where vacuum cleaning is done). Also, heavy equipment should not be moved or rolled
over the cable.
Inspecting the Package
If your multiplexer packaging appears to have been damaged in shipment, please do not
open it. Rather, you should report the damage to the carrier upon delivery. If you determine
that your multiplexer has concealed damage when you open the package, report the damage
to your carrier as soon as possible. In both situations, you should also call MTX Customer
Service to report the problem and have a replacement multiplexer shipped to you.
Call 1-888-334-4380- X6201