Dynex DX-24E150A11 - Manual (Page 30)

26
Maintenance DX-24E150A11
Remote control
General
Note: If the problem is not solved by using these troubleshooting
instructions, turn off your TV, then turn it on again.
Maintenance
Cleaning
• Clean your TV with a soft, dry cloth. If surfaces are extremely
dirty, use a soft cloth dampened with a weak detergent solution.
• Use an eyeglass cleaner to clean the screen. Never use alcohol,
paint thinner, or benzine.
• Before using a chemically treated cloth, read the instructions that
came with the cloth.
Specifications
Design and specifications are subject to change without notice.
Dimensions and weight are approximate.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this
product is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within the limits
for a class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
Problem Solution
Remote control
does not work. • Make sure that the power cord is plugged
in.
• Make sure that there are no obstructions
between the remote control and the
remote control sensor on the front of the
TV.
• Make sure that the batteries are installed
correctly. For more information, see
“Installing remote control batteries” on
page 6.
• Replace the batteries. For more
information, see “Installing remote control
batteries” on page 6.
Trouble
programming your
existing universal
remote control. • See instructions and a table of common
codes in “Programming a universal remote
control to work with your TV” on page 7.
• Codes are subject to change. For up to date
codes, go to www.dynexproducts.com.
• Replace the batteries. For more
information, see “Installing remote control
batteries” on page 6.
• Refer to the User Guide that accompanied
your universal remote control and contact
the manufacturer if problems persist
Problem Solution
One or more
channels do not
display. • Make sure that the channels are not blocked.
For more information, see “Setting parental
control levels” on page 19.
• Make sure that the channels are not hidden.
For more information, see “Hiding channels”
on page 15.
• The channel may have been deleted from the
channel list. You can tune to the channel by
pressing the number buttons or you can add
the channel back to the channel list. For more
information, see “Changing channel settings”
on page 14.
Password is lost. • Enter 9999 to access parental controls, then
set a new password. For more information, see
“Setting parental control levels” on page 19.
Some settings
cannot be
accessed. • If a setting is grayed, the setting is not
available in the current video input mode.
TV cabinet creaks. • When the TV is in use, the temperature rises
naturally and may cause the cabinet to
expand or contract which can cause a
creaking noise. This is not a malfunction.
Control buttons
on the TV do not
work. • Disconnect the power cord, wait a few
seconds, then reconnect the power cord and
turn on the TV.
TV type LCD
TV panel 24-inch TFT LCD
TV system NTSC-M, ATSC
Channels VHF: 2 - 13
UHF: 14 - 69
CATV: 1 - 125
CADTV: 1-135
DTV: 2 - 69
Audio multiplex BTSC system
Audio output 3W × 2
Power requirement AC 120 V, 60 Hz
Power consumption 55 W
Dimensions 16.22 x 22.83 x 5.51 inches (412 x 580 x 140 mm)
Weight 1.02 lbs (5 kg)
Input terminals Composite (AV) video/left and right audio (1)
Component video/left and right audio (1)
HDMI (1)
VGA/audio (1)
Antenna (1)
Output terminals Headphone jack (1)
Control terminals Service Port (1)
DX-24E150A11_10-0762.book Page 26 Tuesday, August 31, 2010 1:17 PM