Dynex DX-24E150A11 - Manual (Page 20)

16
Changing channel settings DX-24E150A11
Adding or changing a channel label
If a channel is not already labeled, you can label the channel to make it
easier to identify. You can also relabel a channel that is already labeled.
To label a channel:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight CHANNELS, then press . The
CHANNELS menu opens.
3 Press or to highlight Channel Labels, then press ENTER.
The Channel Label screen opens.
4 Press or to select a character, then press or to move to
the next position. Repeat to add more characters.
5 Press EXIT to close the menu.
Fitting the picture to the screen
In TV mode (only), your TV can automatically adjust the picture so that
everything fits in the viewable area of the screen.
To fit the picture to the screen:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight CHANNELS, then press . The
CHANNELS menu opens.
3 Press or to highlight Auto Zoom, then press or to
select On.
4 Press EXIT to close the menu.
Checking the DTV signal strength
You can check the DTV signal strength to determine if you need to
adjust your antenna or digital cable input. The higher the signal
strength, the less likely you are to experience picture degradation.
To check the DTV signal strength:
1 Press MENU. The on-screen menu opens.
PICTURE AUDIO CHANNELS SETTINGS
Mode
Advanced Video
Sharpness
Tint
Color
Contrast
Brightness
Energy Savings
6
0
70
57
48
PICTURE AUDIO CHANNELS SETTINGS
Auto Channel Search
Channel Strength
Auto Zoom
Audio Only
Channel Labels
Favorites
Add/Skip Channels
Off
On
PICTURE AUDIO CHANNELS SETTINGS
M
PICTURE AUDIO CHANNELS SETTINGS
Mode
Advanced Video
Sharpness
Tint
Color
Contrast
Brightness
Energy Savings
6
0
70
57
48
PICTURE AUDIO CHANNELS SETTINGS
Auto Channel Search
Channel Strength
Auto Zoom
Audio Only
Channel Labels
Favorites
Add/Skip Channels
Off
On
PICTURE AUDIO CHANNELS SETTINGS
Mode
Advanced Video
Sharpness
Tint
Color
Contrast
Brightness
Energy Savings
6
0
70
57
48
DX-24E150A11_10-0762.book Page 16 Tuesday, August 31, 2010 1:17 PM