Verilink PRISM 4151 (34-00258) Product Manual - Manual (Page 23)

Configuration 3-11 PRISM 4151
Factory Reset: Clears all user selectable parameters
including the IP Address.
To exit this screen without performing the reset function,
press with NO selected. To proceed with the reset
function, move the cursor to YES and press .
The reset operation sets all parameters to the
factory default settings and zeros all perfor-
mance registers.
This command causes the unit to
restart and will interrupt network
traffic. Pressing on this field
to activate the command brings up the fol-
lowing warning:
ARE YOU SURE? - THIS WILL INTERRUPT DDS DATA
(NO!) (YES)