Verilink NCC 2130 (880-503285-001) Product Manual - Manual (Page 9)

Verilink NCC 2130 User Manual 1-1
Chapter
1
Overview
This user manual describes the NCC 2130 Node Controller module,
a component of Verilink’s Access System 2000 (AS2000) platform.
The NCC 2130 is a network management module which also
functions as an integrated T1 CSU/DSU.
Scope This manual assumes you are already familiar with the standard
AS2000 products. Where appropriate, the text refers you to a
specific Access System 2000 manual for greater detail.
Installation
Information
For information on installing and replacing shelves, modules, and
power supplies, see the manual
AS2000, The Basics .
NOTE: Do not mix NCM, NCC, and SCC node controllers in the same
node. There can be only one type of node controller in a
node.
Related Verilink
Documents
Refer to the following related AS2000 manuals:
• NCC 2020 User Manual , —documents the network controller
version of the TAC 2010 T1 CSU.
• AS2000, The Basics —provides general information about
Verilink products.
• Node Manager for Windows 95 User Manual , —documents the
Verilink network management program designed to operate
under Windows™ 95 or Windows™ NT.
• Access Manager 2000 User Manual , —documents the Verilink
network management program designed to operate under
Windows™ 3.1 (only).
Features The NCC 2130 module includes a T1 CSU/DSU and a controller
which can option and maintain up to 29 other modules in a node.
An NCC module acts as the focal point through which a network
manager can access the entire AS2000 node. The NCC 2130
supports two Verilink network management programs, Access
Manager 2000 and Node Manager.
The ASCII Craft interface provides local access by direct connection
to the Craft port.