Tri Tool 620SB Clamshell Hydraulic - Manual (Page 17)

17
Model 620SB Low Profile Clamshell, Hyd.
92-0282 : Rev. 131230
NOTE:
LUBRICANT RECOMMENDATIONS
The Drive Gears require a high string lubrication grease such as “Chevron Utility
Grease, light, high string for gears” (P/N 68-0020).
The Slide Rails and Tool Blocks require a light oil such as SAE 10 light machine oil.
The Feed Screw for the Tool Block and the Tripper Block Assy require a SAE 10 light
machine oil for normal conditions and under dusty conditions a silicone, graphite or
molybdenum disulfide ‘dry’ lubricant.
A light film of all-purpose grease may be used, but it must be checked for grit
contamination frequently.
The Bearings in the Hydraulic Motor are sealed and do not require any lubrication.