Tri Tool 602TSB Clamshell Air - Manual (Page 9)

9
Model 602TSB
92-0139 : Rev.131230
NOTE:
MAINTENANCE
All components should be cleaned and coated with a light film of oil prior to use.
Use a clean, non-detergent oil, preferably SAE 10 (90 SSU) or lighter.
Air supply for the Model 602TSB Clamshell with an Air Motor requires an adequate
filter/regulator/lubricator (FRL) to be used.
The Motor warranty is void if damage occurs from contaminated air or lack of
lubrication.
Clean Up
If the Clamshell is operated in such a manner that the Tool Blocks collect debris
while cutting, the Tool Blocks and the Feed Screws should be cleaned after each
cutting operation.