Thinklogical OriginKVM 41 Manual - Manual (Page 9)

REVISION A 5 JUNE 2008
3. Connecting the OriginKVM 41
All physical connections to the product use industry-standard connectors. All connections are
found on the rear of the unit.
3.1 Front Panel View: LED Indicators
Power LED on (green) Power is connected and supplied to OriginKVM 41
LED off Power is not connected and/or not supplied to OriginKVM 41
Console
1 LED on (green) A USB device is connected at the USB A connector labeled 1 of the
Console
LED off A USB device is not connected/proper connection has not been
made at the USB A connector labeled 1 of the Console
2 LED on (green) A USB device is connected at the USB A connector labeled 2 of the
Console
LED off A USB device is not connected/proper connection has not been
made at the USB A connector labeled 2 of the Console
3 LED on (green) A USB device is connected at the USB A connector labeled 3 of the
Console
LED off A USB device is not connected/proper connection has not been
made at the USB A connector labeled 3 of the Console
4 LED on (green) A USB device is connected at the USB A connector labeled 4 of the
Console
LED off A USB device is not connected/proper connection has not been
made at the USB A connector labeled 4 of the Console
CPU 1-4
SEL LED on (green) Channel is selected
USB LED on (green) USB is connected properly and power is supplied
HDMI LED on (green) HDMI is connected properly and power is supplied
IR
ACT LED on (red) IR Receiver is communicating/receiving data from the remote