Thinklogical Velocitykvm T-4200 DVI Modules 4, 5, 8, 24 Manual - Manual (Page 23)

T-Series DVI Modules, Rev. C
23 October, 2012
Appendix D-
VelocityKVM T-Series
Multi Video Path, Separate Data
Path and Separate Audio Path Module Ordering
Information
Thinklogical’s ® line of Separate Video, Audio and Data Path Modules are designed to
accommodate systems that require data transmission security and for systems with a lower
video transmission rate, or for systems not transmitting video through a Thinklogical
® KVM
Matrix Switch.
• The Velocity T-Series Multi Video Path Module allows one 6.22 Gbps DVI signal to be
transmitted across two fibers at a bandwidth of 3.11 Gbps per fiber.
• The Velocity T-Series Separate Audio Path Module allows audio signals to be transmitted on
one fiber and received on another fiber, separate from Video, USB, PS2, RS-232 and Stereo
Emitter data, which are transmitted on two independent fibers.
• The Velocity T-Series Separate Data Path Module allows KMASS data to be transmitted on
one fiber and received on another fiber, separate from video data, which is transmitted on a
separate, third fiber.
Part Numbers and Descriptions
1. Velocity T-4200 Chassis: Designed to accommodate any combination of up to two Multi Path,
Separate Audio or Separate Data Modules and all other VTM Module varieties.
VTS-004200 Velocity T-4200 CHASSIS
Velocity T-4200 Chassis
VTM-004200