Thinklogical Velocitykvm T-4200 SDIXtreme 3G+ Module Manual - Manual (Page 13)

®
T-Series SDI Modules, Rev. A
13 September 2011
3. REGULATORY & SAFETY COMPLIANCE
3.1 Safety Requirements
3.1.1 Symbols found on the product
Markings and labels on the product follow industry-standard conventions. Regulatory markings found on
the products comply with domestic and many international requirements.
3.1.2 Regulatory Compliance
Thinklogical VelocityKVM Extender products are designed and made in the U.S.A. VelocityKVM
Extender products have been tested by a certified testing laboratory and found to be fully compliant with
the following standards (both domestic USA and many international locations):
North America
Safety
ANSI/UL60950-1: 1
st
Edition (2003)
CAN/CSA C22.2 No. 60950-1-03
LASER Safety
CDRH 21CFR 1040.10
Class 1 LASER Product
Electromagnetic Interference
FCC CFR47, Part 15, Class A
Industry Canada ICES-003 Issue 2, Revision 1
Australia & New Zealand
This is a Class A product. In a domestic environment this product may cause radio interference, in
which case the user may be required to take adequate measures.
European Union
Declaration of Conformity
Manufacturer’s Name & Address: Thinklogical
®
100 Washington Street
Milford, Connecticut 06460 USA
Telephone 1-203-647-8700
These products comply with the requirements of the Low Voltage Directive 72/23/EEC and the EMC
Directive 89/336/EEC.
3.1.3 Standards with Which Our Products Comply
Safety
CENELEC EN 60950-1, 1
st
Edition (2001)