Thinklogical SDIXtreme 3G and 3G+ Manual - Manual (Page 8)

Revision E 8 July 2012
OPTICAL Output:
Connector
LC receptacle
Fiber Type
Multi-mode 10 km Single Mode 40 km Single Mode
Wavelength (nominal) 850nm 1310nm 1550 nm
Emitter Type VCSEL DFB Laser DFB Laser
Output Power (nominal) -4dBm -1.5dBm 2.5dBm
Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
RECEIVER Specifications:
Fiber Input
Connector
LC receptacle
Fiber Type
Multi-mode 10 km Single Mode 40 km Single Mode
Wavelength 770 – 860nm 1260 - 1360nm 1260-1600nm
Minimum Input Sensitivity -12dBm -15dBm -18dBm
Maximum Input Power 0 dBm 0.5dBm -3dBm
Number of SDI Outputs
1 - 2
Signal Level 800mV ± 10%
DC Offset 0V ± 0.5V
Overshoot < 10% of amplitude
Timing Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 2 UI at 2.97 Gbps with color bar signal
Alignment Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.3 UI at 2.97 Gbps with color bar signal
Rise/Fall Time 0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M
< 270 ps at 1.485 Gbps per SMPTE 292;
< 135 ps at 2.97 Gbps per SMPTE 424M;
Re-clocking At 270 Mbps, 1.485 Gbps, and 2.97 Gbps