Teo 8610 ISDN Phone Installation - Manual (Page 7)

Introduction
13-280116 Rev. C Page 7
Controls and Indicators _______________________________________
1) Display – shows the call state, caller ID, dialed digits, network call control messages, and elapsed time
during calls. When not on a call, the date, time of day, and softkey options are displayed.
The viewing is primarily set by selecting the high or low base mounting position (page 13). Viewing
angle display clarity can be altered by adjusting the display contrast.
2) Softkeys – select the function displayed above the key on the second line of the display.
3) CALL Key – selects the Call Directory, Call Log, and Call Identification Display modes.
4) SETUP Key – enters Setup Mode.
5) DONE Key – exits the current menu, saves any changes made, and returns to the previous menu
options.
6) MORE 4 Key – cycles through the menu option groups in Setup Mode.
7) Message Waiting Indicator – a bright red indicator is lit when messages are waiting, controlled by the
network.