Teo 8610 ISDN Phone Installation - Manual (Page 24)

Tone Commander 8610/8620 Installation Instructions
Page 24 13-280116 Rev. C
Using the dial pad, enter the number you would dial to call the monitored station.
CLEAR removes all digits, allowing you to start over.
Press the DONE key three times to return to the key selection menu or press the SETUP key to
exit Setup Mode.
Speed Dial Keys
Unused keys not assigned for call appearances or feature activators may be used as Speed Dial keys.
Dialing strings can include network feature activator codes, to simplify the use of features such as Directed
Call Pickup and Call Forwarding. Speed Dial keys may also be programmed from the User Options menu.
The currently programmed dial string, if any, will be shown in the display.
Enter digits (24 maximum) with the dial pad.
After entering the first digit, pause, or feature activator, the FA softkey will be replaced by CLEAR.
If you need to make corrections while entering numbers, select ÅBKSP (backspace) to delete the
previous digit.
CLEAR removes all digits, allowing you to start over. A Speed Dial key will revert to 'Unused' if
saved with a cleared dial string.
“Smart” Pauses
Pauses are entered with the PAUSE softkey, and are shown in the display as a P character. The
first pause in a dial string will wait until the call is answered; additional pauses delay dialing for
one second. Enter multiple pauses to increase the delay time.
5551234P1P12
←BKSP CLEAR PAUSE
←BKSP FA PAUSE
5551234
←BKSP CLEAR PAUSE