Terminal mode (national isdn only), Terminal mode=cach ekts cach basic merid1 – Teo 8610 ISDN Phone Installation User Manual
Page 26
Tone Commander 8610/8620 Installation Instructions
Page 26
13-280116 Rev. C
Terminal Mode (National ISDN only) ______________________________
If the network does not support Parameter Download, you must manually select the terminal mode.
From the Installation Options menu, select MODE.
(
SETUP
→ INSTL →
MORE
4 → MODE)
Select the terminal mode based upon the type of service that was ordered from your network
service provider.
CACH – CACH EKTS (default).
BASIC – Voice or Basic EKTS.
MERID1 – Nortel Meridian 1 Option Series PBX.
In most cases, your phone service should be configured for CACH EKTS.
Press the
DONE
key to return to the Installation Options menu or press the
SETUP
key to exit
Setup Mode.
TERMINAL MODE=CACH EKTS
CACH BASIC MERID1