Teletronics MiniLink - Manual (Page 14)

For 40bit encryption you may choose:
ASCII: Enter 5 characters (case sensitive) ranging from “a-z”, “A-Z”
and “0-9” (e.g. MyKey).
Hex: Alternatively, you may enter 10 hexadecimal digits in the range
of “A-F”, “a-f” and “0-9” (e.g. 11AA22BB33).
For 128bit encryption you may choose:
ASCII: Enter 13 characters (case sensitive) ranging from “a-z”, “A-Z”
and “0-9” (e.g. MyKey12345678).
Hex: Alternatively, you may enter 26 hexadecimal digits in the range
of “A-F”, “a-f” and “0-9” (e.g. 00112233445566778899AABBCC).
After entering the WEP keys in the key field, select one key as active key.
Alternatively, you may create encryption keys automatically by using
Passphrase. From the Passphrase field, type a character string and click
Generate. As you type, the wireless station adapter will use an algorithm to
generate 4 keys automatically. Select one key from the 4 WEP keys.
Moreover, the wireless station adapter provides two types of authentication
services: Open System and Shared Key. The default authentication type is
Open System. If you require higher security for wireless access, you may
select Shared Key. Note that when Shared Key is selected, a WEP key is
required and must be the same with the key that Shared-Key-enabled AP
uses.
For WPA-PSK mode you may choose:
In the WPA-PSK field, you may enter 8-63 characters ranging from “a-z”,
“A-Z” and “0-9”.