Teletronics MiniLink - Manual (Page 12)

Channel: Select a clear and available channel as an operational channel
for your wireless station adapter when it performs as Ad-Hoc mode.
Mode: There are three different wireless modes to operate, “B Only
Mode”, “G Only Mode”, and “B/G Mixed Mode”. In B/G Mixed Mode, the
wireless station adapter is compatible with a mix of both 802.11g and
802.11b clients. You will see that the factory-set default “B/G Mixed Mod”
will prove the most efficient. B Only Mode is compatible with 802.11b
clients only. This mode can be used only if you do not allow any 802.11g
clients to join a network. G Only Mode is compatible with 802.11g clients
only. This mode can be used only if you do not allow any 802.11b clients
to access to the network. To switch the mode, select the desired mode
form the pull-down menu next to “Mode”.
Rate: The wireless station adapter provides various data rate options for
you to choose. Data rates options include Auto, 1, 2, 5.5, 11, 6, 9, 12,
18, 24, 36, 48 and 54. The default setting is Auto.
Country/Region: Allows you to select country domain in case there is
any chances that you would use wireless network in other countries.
There are a total of 11 countries for you to select. They are Africa, Asia,
Australia, Canada, Europe, France, Israel, Japan, Mexico, South America,
and USA. Note that if your AP and station adapter are in different
standards, please use the “Country/Region” item to switch the
standards of the station adapter (For example, if your Access Point is
America standard but your station adapter is Japanese standard, you can
pull down the “Country/Region” option to switch your station adapter
from Japanese standard to American standard.).
Password: You may change the default password by entering the new
password.
Click “Apply” if you have made any changes.