Teletronics MiniLink - Manual (Page 13)

SECURITY:
WEP:
The wireless station adapter allows you to create up to 4 data encryption
keys to secure your data from being eavesdropping by unauthorized
wireless user. To enable the encryption, all devices on the network, such as
the Access Point, must share the same WEP selection – either Enable or
Disable, and they must share the same WEP key.
Disable: Allows the wireless station adapter to communicate with the
Access Point without any data encryption.
WEP40: Requires the wireless station adapter to use data encryption
with 40-bit algorithm when communicating with the Access Point.
WEP128: Allows the wireless station adapter to communicate with the
Access Point with data 128-bit encryption algorithm.
WPA: Allows the wireless station adapter to communicate with the
Access Point with a more secure data protection than the WEP. Here you
can select the WPA with PSK mode to improve the data security and
privacy during wireless transmission. The present WPA supplied with this
station adapter is used in a pre-shared key mode, which does not require
an authentication (Radius) server.