Teletronics EZ Bridge 802.11G - Manual (Page 24)

24
WPA Multicast Cipher Type
Select TKIP - WPA Default
WPA Pairwise Cipher Type
Select TKIP - WPA Default
WEP Configuration
Short for Wired Equivalent Privacy, a security protocol for wireless local
area networks (WLANs) defined in the 802.11b standard. WEP is designed
to provide the same level of security as that of a wired LAN.
Enable WEP
To enable the WEP Authenticator
WEP key length
Encryption strength of the web key. Defualt = 64bit (10 Hex digits)
Default WEP key to use
Select the key to be used as the default key. Data transmissions are always
encrypted using the default key. The other keys can only be used to decrypt
received data.
WEP key
Type in a 10 hex digit password if using 64 bit WEP key length.
Type in 26 hex digits password if using 128 bit WEP key length.
Hex Digits = 0-9 and A-F
Deny unencrypted data
Force the peer connection(s) to this bridge to use encryption to farther
increase security.
Authentication