Tecfluid MX4 For FLOMAT Series - Manual (Page 43)

43
11 MAINTENANCE
No special maintenance is required .
For cleaning, a humid cloth can be used, and if necessary with a little neutral soap.
Solvents or other aggressive liquids which could damage the housing material should not
be used.
11.1 Fuse
In the event that the fuse blows, this should be replaced with a slow blow “T” fuse, size
Ø5 x 20 mm and value 250 mA.
10. WORKING SCREEN
When exiting the menu, the display shows the default screen. To scroll between the three
operating screens, press the key (Down / Left) or (Up).
11
10
CONVERTER PROGRAMMING