Tecfluid MX4 For FLOMAT Series - Manual (Page 29)

29
Once the password is entered, and after pressing the key (Enter), the first screen allows
to choose between the different options of the installation menu.
6.2 Sensor factor
In this screen the sensor factor is shown. It should coincide with the Fc parameter on the
sensor label.
6.1 Language
You can choose the language in which all the menus will be displayed.
6 INSTALLATION PARAMETERS
Power on the electronic converter with the voltage indicated on the label.
Press the (Enter) key in order to enter the main menu.
With the keys (Down / Left) and (Up), select “Installation”, and then validate with the key
(Enter).
In order to access to the Installation menu, a password must be entered. When accessing
the first time, the default password is 0123. For more details about the password, see
paragraph 5.1, page 27.
6
INSTALLATION PARAMETERS