Teac US-1200 - Manual (Page 6)

6
TASCAM US-1200
1 – Introduction
Trademarks
• TASCAM is a trademark of TEAC Corporation, registered in
the U.S. and other countries.
• Microsoft, Windows, Windows XP, Windows 7, Windows 8
and Windows Media are either registered trademarks or
trademarks of Microsoft Corporation in the United States
and/or other countries.
• Apple, Macintosh, Mac OS, Mac OS X and iTunes are
trademarks of Apple Inc.
• SONAR is a trademark of Cakewalk, Inc.
• Ableton and the Ableton logo are trademarks of Ableton
AG. VST is a trademark of Steinberg Media Technologies
GmbH.
• ASIO is a trademark and software of Steinberg Media
Technologies GmbH.
• Other company names, product names and logos in this
document are the trademarks or registered trademarks of
their respective owners.
Any data, including, but not limited to information, described
herein are intended only as illustrations of such data and/or
information and not as the specifications for such data and/
or information. TEAC Corporation disclaims any warranty that
any use of such data and/or information shall be free from
infringement of any third party’s intellectual property rights
or other proprietary rights, and further, assumes no liability
of whatsoever nature in the event of any such infringement,
or arising from or connected with or related to the use of
such data and/or information.
This product is designed to help you record and reproduce
sound works to which you own the copyright, or where
you have obtained permission from the copyright holder or
the rightful licensor. Unless you own the copyright, or have
obtained the appropriate permission from the copyright
holder or the rightful licensor, your unauthorized recording,
reproduction or distribution thereof may result in severe
criminal penalties under copyright laws and international
copyright treaties. If you are uncertain about your rights,
contact your legal advisor. Under no circumstances will TEAC
Corporation be responsible for the consequences of any
illegal copying performed using the recorder.
Precautions for placement and use
• The operating temperature range of this unit is 5–35 °C.
• Do not install this unit in the following types of locations.
Doing so could make the sound quality worse or cause
malfunction.
Locations with frequent vibrations
Next to a window or in another location exposed to
direct sunlight
Near heating equipment or in other locations that
become very hot
Very cold locations
Very humid or poorly ventilated locations
Very dusty locations
• Install the unit so that it is level.
• To enable good heat dissipation, do not place anything on
top of the unit.
• Do not place the unit on top of a power amplifier or other
device that generates heat.
Beware of condensation
Condensation could occur if the unit is moved from a cold place
to a warm place, is used immediately after a cold room has
been heated or is otherwise exposed to a sudden temperature
change. Should this happen, leave the unit for one or two hours
before turning the unit on and using it.
Using the TEAC Global Site
You can download the dedicated drivers and Owner’s Manual
necessary for this unit from the TEAC Global Site (http://
teac-global.com/).
1. Open the TEAC Global Site (http://teac-global.com/).
2. In the TASCAM Downloads section, click the desired
language to open the Downloads website page for that
language.
NOTE
If the desired language does not appear, click Other
Languages.
3. Click the product name in the “Search by Model Name”
section to open the Downloads page for that product.
4. Select and download the dedicated drivers and Owner’s
Manual that are needed.
User registration
Customers in the USA, please visit the TASCAM website (http://
tascam.com/) to register as a user online.
Cleaning the unit
To clean the unit, wipe it gently with a soft dry cloth. Do not
wipe with chemical cleaning cloths, thinner, alcohol or other
chemical agents. Doing so could damage the surface or cause
discoloration.