Teac DR-44WL - Manual (Page 5)

TASCAM DR-44WL
5
Right side panel
f EXT IN switch
g INPUT LEVEL button
h INPUT LEVEL volume
j USB port
Bottom panel
k Built-in mono speaker
l Tripod attachment thread
(1/4 inch)
; Battery compartment cover
z Strap attachment
x Battery compartment
Names and Functions of Parts
Top panel
1 Built-in stereo microphone
2 PEAK indicator
3 Display
4 TRACK/INPUT button
5 8/HOME button
6 . Fast rewind button
7 7/9 button
8 MENU button
9 MTR indicator
0 MIXER button
q RECORD [0] button / RECORD indicator
w / Fast forward button
e INPUT button
r ENTER/MARK button
t QUICK button
y Wheel
Front panel
u Wi-Fi indicator
i EXT MIC/LINE IN 1/L and 2/R terminals
(XLR/TRS)
Left side panel
o SD card slot
p HOLD/ switch
a /LINE OUT jack
s OUTPUT LEVEL button
d Wi-Fi button
You can also download this Owner’s Manual and the
Reference Manual from the TEAC Global Site (http://
teac-global.com/).
Precautions for placement
and use
• The environmental temperature operating range
of this unit is 0–40°C (32–104°F).
• Do not install this unit in the following types of
locations. Doing so could degrade the sound
quality and/or cause malfunctions.
Places with significant vibrations
Near windows or other places exposed to
direct sunlight
Near heaters or other extremely hot places
Extremely cold places
Places with bad ventilation or high humidity
Very dusty locations
• If this unit is placed near a power amplifier or
other device with a large transformer, it could
cause a hum. If this occurs, increase the distance
between this unit and the other device.
• This unit could cause color irregularities on a TV
screen or noise from a radio if used nearby. If this
occurs, use this unit farther away.
• This unit might produce noise if a mobile phone
or other wireless device is used nearby to make
calls or send or receive signals. If this occurs,
increase the distance between this unit and those
devices or turn them off.
• To enable good heat dissipation, do not place
anything on top of this unit.
• Do not place this unit on top of a power amplifier
or other device that generates heat.
Beware of condensation
If the unit is moved from a cold to a warm place,
or used after a sudden temperature change, there
is a danger of condensation; vapor in the air could
condense on the internal mechanism, making
correct operation impossible. To prevent this, or if
this occurs, let the unit sit for one or two hours at the
new room temperature before using it.
Cleaning the unit
Use a dry soft cloth to wipe the unit clean. Do not
wipe with chemical cleaning cloths, thinner, alcohol
or other chemical agents. Doing so could damage
the surface or cause discoloration.
Using the TEAC Global Site
You can download this Owner’s Manual and the
Reference Manual necessary for this unit from the
TEAC Global Site (http://teac-global.com/).
1. Open the TEAC Global Site (http://teac-global.
com/).
2. In the TASCAM Downloads section, click the
desired language to open the Downloads
website page for that language.
NOTE
If the desired language does not appear, click
Other Languages.
3. Click the product name in the “Search by Model
Name” section to open the Downloads page for
that product.
4. Select and download the Owner’s Manual and
the Reference Manual that are needed.
User registration
Customers in the USA, please visit the TASCAM
website (http://tascam.com/) to register as a user
online.