Teac X-48 Quick Start - Manual (Page 3)

TASCAM X-48 Quick Reference Guide
3
D008722-01A
Mixer Bypass Enable/Disable Mixer bypass.
Loop Mode Sets a loop playback type.
AES 2X Mode Sets an AES/EBU transmission method in 2x sample rate.
S/PDIF Input SRC Enable/Disable sampling rate converter on S/PDIF inputs.
Auto Input Changes the auto input mode. (On/Off/ADR).
Punch Crossfade Sets crossfade time of punch in/out.
EDL Crossfade Shape Sets a crossfade curve in the EDL.
Overload LED Time Sets a lighting length of time of the overload indicators.
Audio File Naming Sets an automatical naming method for audio clips.
Auto Save Enable/Disable auto save feature of EDL.
Auto Save Time Sets an auto save interval.
P2 Track Arm Enable/Disable allowing to arm tracks over 9-pin.
P2 Punch Delay Sets a delay time from receiving punch in command up to punching in.
P2 Chase Control Sets chase mode over 9-pin(LTC/MTC/Disabled).
Meters Changes the meter display.
Looping Enable/Disable the playback looping.
Scrolling Sets a scroll type for the track screen.
Load Last Project Enable/Disable loading the last project which being open when X-48 shutdowned
the last time.
SYS menu
Settings Recalls/Store system settings.
Midi Device ID Sets MIDI device ID for the X-48.
Network Sets address information for networking.
About Shows X-48 software version.
VGA Pull-down Menu
File menu
New Project… Create a new project.
Open Project… Open an existing project.
Save Project Saves the current project.
Save Project As… Saves the current project as an another name.
Convert To Non-Destructive Convert the current project to Non-destructive mode(No undo possible).
Import Project… Import an OpenTL project into the X-48.
Export Project… Export the current project from X-48 as AAF or OpenTL.
Import Audio File… Imports an audio file into the current project.
File Manager… Launch the File Manager screen.
Disk Management… Launch the Disk Management screen.
Drive Benchmarking… Launch Drive Benchmark utility.
Drive Sharing… Activate Drive Sharing.
Launch External Application… Launch an External Application.
Launch MX View… Launch MX-view for the MX-2424.
Launch Mixer Companion… Launch TASCAM Mixer Companion.
Shutdown… Shutdown X-48.
Edit menu
undo Undo the last undoable operation.
Redo Reverse the last undo oparation.
Copy Copy selection into the copy buffer.
Cut Delete selection and copy the data into the copy buffer.
Delete Delete selection.
Paste Paste audio data in the copy buffer from the current playhead position on the