Teac US-2400 Quick Start - Manual

11
» US-2400
Quick Start Guide
Computer requirements
To use the US-2400 with a computer running a Digtal Audio Workstation
(DAW) application, the computer must be running either of the following
operating systems. Note that no driver is required to install and operate the
US-2400 with these systems.
Windows XP
We recommend that the latest Service Pack is installed, in order to take advan-
tage of the MIDI and audio services provided in the latest releases.
Mac OS X
The US-2400 requires OS X 10.2.8 or above, including 10.3 (Panther), in or-
der to function correctly. Free upgrades from previous versions of OS X 10.2
to 10.2.8 are available for download from the Apple Computer Web site.
Installation (Windows and Mac OS X)
1 Start the computer and log in.
2 Using the supplied USB cable, connect the US-2400 to a USB port
on the computer.
Installation (Windows)
3 Connect the US-2400 AC adapter to an AC power outlet, and con-
nect the power cable of the adapter to the DC IN of the US-2400. The
POWER indicator will light.
The system recognizes the US-2400, installs its own device driver ser-
vices and informs you the device is ready for use. The USB indicator
on the US-2400 lights.
Installation (Mac OS X)
3 Connect the US-2400 AC adapter to an AC power outlet, and con-
nect the power cable of the adapter to the DC IN of the US-2400. The
POWER indicator will light.
The USB indicator on the US-2400 lights. Open the
Audio/MIDI Setup
util-
ity program (
/Applications/Utilities
) and check in the
MIDI Devices
tab that the
US-2400 is now visible as a 4-port MIDI device.
D00824500A