Front panel, 2 – parts of the us-122l – Teac US-122L User Manual
Page 9

TASCAM US-122L
2 – Parts of the US-122L
Front panel
D
MIC IN (L, R) jacks
(XLR balanced)
These are analog mic input jacks. The wir-
ing is as follows: pin 1 = ground, pin 2 =
hot, pin 3 = cold.
E
LINE IN (L, R) jacks
(TRS 1/4" phone
jacks) These are balanced line input jacks.
The R channel also accommodates guitar
input. If the top panel
MIC/LINE
-
GUITAR
select switch is in the
GUITAR
position, the
R jack operates as an unbalanced input
jack for guitar.
If the
MIC/LINE-GUITAR
select switch is in
the
MIC/LINE
position, the R jack operates
as a balanced input jack. (Sleeve = ground,
tip = hot, ring = cold)
F
PHONES jack
(stereo 1/4" phone) This
is a headphone output jack.
NOTE
If you connect headphones to this jack,
no signal will be output from the LINE
OUT jacks.