Teac US-122L - Manual (Page 17)

TASCAM US-122L
1
6 – Recording with Cubase LE
This chapter explains the basics you will
need to understand when using the
US-122L with Cubase LE.
This discussion is not intended to replace
the user manual of your software.
If you have questions specific to Cubase
LE, please refer to the Cubase LE user
manual.
6 – Recording with Cubase LE
Input setting
Start up Cubase LE. From the
Devices
menu, choose Device Setup.
The Device Setup window will
appear.
From the device list in the left side of
the Device Setup window, choose VST
Multitrac
.
In the right side of the window, click
the Setup tab, specify the ASIO Driver
for the interface that uses an ASIO
driver, and click the Apply button.
If you have connected the digital
input, set the Clock Source to exter-
nal
.
1�
2�
3�
From the Devices menu, choose VST
Inputs
to access the VST Inputs win-
dow. Verify that the Port field shows
the input name of the audio interface
you are using, and that the Active
indicator is lit.
4�