Teac Cubase LE 5 - Manual (Page 8)

8
TASCAM Cubase LE 5
Recording
1 Select the track that you want to
record to, and set the input bus in the
Input Routing field on the left side of
the window.
Press the Monitor button if you want
to hear the input signal.
2 After you have completed setting the
input buses for every track, click the
Record Enable buttons (making them
red) for the tracks that you want to
record on.
3 Press the (REC) button in the
transport section to start recording.
4 When you finish recording, press
the (STOP) button, then click the
Record Enable buttons to turn it off
(the button indicator will turn off).
Rewind if necessary.
5 Repeat steps 1-4 to overdub
additional tracks.