Teac SX-1:SX-1LE Documentation Sony P2 Protocol - Manual (Page 11)

BIT 7 6 5 4 3 2 1 0
DATA MSB LSB
0 VIDEO REF
MISSING
1 STANDBY STOP REW F.FWD REC PLAY
ON
2 SERVO SHUTTLE JOG VAR REVERSE STILL CUE UP
LOCK DIR ENDED
3
4 SELECT EE FULL EE EDIT CUE UP
ON ON STARTED
5 INSERT A2 A1
6
7
8
9
A
B
C HDR CH8 HDR CH7 HDR CH6 HDR CH5 HDR CH4 HDR CH3 HDR CH2 HDR CH1
DATA 0/BIT 4: VIDEO REF MISSING
This bit is set when there is no video or TTL signal present at the VIDEO IN BNC
connector of the SX-1.
DATA 1/BIT 7: STANDBY ON
This bit is always set.
DATA 1/BIT 5: STOP
This bit is set whenever the SX-1 HDR is stopped, except when in shuttle mode with
speed=0.
DATA 1/BIT 3: REW
This bit is set when the SX-1 HDR is rewinding.
10