Teac FW-1884 Applications Guide - Manual (Page 6)

FW-1884
Applications Guide
˘ Adds an additional eight control strips to
the FW-1884
˘
Eight 100mm touch-sensitive moving faders
˘
Add up to 15 FE-8 sidecars for a total of
129 moving faders
˘ Dimensions: 133mm(H) x 260mm(W) x
478mm(D)
˘
Weight: 5.0kg
7733 Telegraph Rd • Montebello, CA • 90640 • phone 323.726.0303 • www.tascam.com
© 2003 TEAC Corporation All trademarks are the property of their
respective holders. All rights reserved. Design and specifi cations subject to
change without notice. Product photographs are shown only to illustrate
the types of product which are compatible with the TASCAM FW-1884
Computer Interface. These products are not manufactured by the TASCAM
Division of TEAC Corporation.
Optional Accessory: FE-8 Expander
FW-1884 Rear Panel
˘ Eight XLR Mic Inputs
˘
Switchable Phantom Power
˘
Eight 1/4” TRS Balanced Line Inputs
˘
Eight 1/4” TRS Balanced Line Outputs
˘ Guitar/Line level switch on Channel 8
˘ Eight TRS Insert Jacks
˘
Four MIDI Inputs
˘
Four MIDI Outputs
˘ Two FireWire (IEEE 1394) Jacks
˘
Coaxial S/PDIF Digital Input/Output
˘
ADAT or S/PDIF Optical Digital Input/Output
˘
75Ω Word Sync Input and Output
˘ 1/4” Stereo Headphone Jack
˘ Footswitch Jack
˘
IEC Power Input
06/30/03 Pa
g
e
6
of 6