Dm-24 quick start guide, Controlling the da-78hr – Teac DM-24 Quick Start User Manual

Page 14

The DM-24 allows control over the DA-78HR DTRS recorder, using the built-in transport
controls, etc.

As well as this, the

REC

keys above the channels can also be used to arm the tracks of the

DA-78HR, and other special features of the DA-78HR are also directly controllable from
the DM-24.

To set up the DM-24 to control the DA-78HR:

Controlling the DA-78HR

With the

SHIFT

indicator lit, press the

MIDI/

key and then soft key 2.

Turn the dial until the

DA-78HR

is high-

lighted in the list at the right of the screen,
move the cursor to the

<-ADD

button at t he

bottom of the list, and press

ENTER

Move the cursor to the left side of the screen
where the DA-78HR is listed.
Move the cursor to the

TRA

button and press

ENTER

. This allows the transport controls

of the DM-24 to control the DA-78HR.

With the

SHIFT

indicator lit, press the

OPTION

key.

Press soft key 4 to bring up the

SYNC/

TIMECODE

screen.

Select

OTHERS/ TRA Target Link

(the DA-

78HR which has been selected as the trans-
port target) as the

TIMECODE DISPLAY

TYPE.

The timecode is received through the

DTRS

REMOTE CONTROL

connector.

Consult the DA-78HR documentation for
details of how to select the timecode used for
output.

DM-24 Quick Start Guide