Teac CD-01U Quick Start - Manual (Page 3)

3
pressing the REPEAT key.
You can also enable or disable the repeat
function using the
REPEAT menu item (menu
03).
A-B repeat playback
You can play back the desired portion (between
points A and B) on a track repeatedly by the
following procedure.
1. When the repeat playback function is
disabled, during playback, press and hold
down the
REPEAT key until REPEAT on
the display starts flashing.
2. Press the REPEAT key at the beginning of
the desired portion.
The A point is set.
3. Press the REPEAT key at the end of the
desired portion.
The B point is set and the unit
automatically starts repeat playback between
the A and B points.
To stop A-B repeat, press the ·key.
You can also carry out A-B repeat playback
using the
A-B option of the REPEAT
menu item (menu 03).
Program playback
Using the program playback function, you can
play back the desired tracks in the desired order.
Creating the program
1. While stopped, press the PGM key.
The display shows the program setting
screen.
The number on the right shows the program
number.
2. Use the numeric keys or SKIP keys to select
the desired track you want to set to the
current program number.
3. Press the SEARCH ˚key.
The selected track is set and the display
shows the next program number.
4. Repeat steps 2 and 3 above as many times
as needed.
5. When you finish creating the program, press
the PGM key to exit the program setting
mode.
To replace a programmed track:
1. On the program setting screen, use the
SEARCH keys to select the program number
to which the track you want to replace is set.
2. Use the numeric keys or SKIP keys to select
the desired track with which you want to
replace the current track.
3. Press either of the SEARCH keys to confirm
the setting.
To add a track:
1. On the program setting screen, use the
SEARCH keys to select the program number
to which you want to add a track.
2. Press the A.RDY/INS key.
3. Use the numeric keys or SKIP keys to select
the desired track.
4. Press either of the SEARCH keys to confirm
the setting.
To delete a track:
1. On the program setting screen, use the
SEARCH keys to select the program number
to which the track you want to delete is set.
2. Press the A.CUE/DEL key.
Intro check
Using the intro check function, you can hear the
beginning ten seconds of each track one after
another.
To enable the intro check function, press the
INTRO CHECK key to turn on INT on the
display.
Tip