SVSi VMT-105 User Manual
Page 7
A. Host Play – Each Encoder has on-‐board memory for storing a various amount of still image files.
These can be used to display a slideshow to multiple Decoders in a similar fashion to Live Play.
This will turn off the attached video sources video, and begin playing back the slideshow
B. Live Play – This is the video coming from the attached device
C. EmCast – An Emergency Messaging system that can send message to all Decoder s in the
network.
2. Decoders
A. Local Play – The same thing as host play, but is only available on the Decoder
B. Live Play – Plays the live stream coming from a Encoder.
Changing the Matrix
1. Start by attaching a video source to an available Encoder.
2. Verify your Encoder is in Live Play Mode
3. Verify your desired Decoders are in live play mode as well.
4. Using the Radio Buttons, click the cross-‐point for the Encoder/Decoder combination – as shown below.
5. The Background will turn Yellow. Continue attaching Decoders to Encoderss until you have made all of
your connections.
TIP: Start by attaching all of your Decoders to one Encoder to verify on all devices that streaming is working
6. Select the “Take” Button. This will make the changes in your matrix, and the background for all
checkboxes changed will turn blue.