N6123 network video recorder commands, Decoder commands (continued) – SVSi N8000 Control API User Manual
Page 6
6
N8000 Series Direct Control API
www.svsiav.com
N6123 Network Video Recorder Commands
sendirraw
Executes IR command without saving
command on device. Uses long form
Pronto HEX Codes provided by
equipment manufacturer.
Decoder IP, IR
pronto code
sendirraw 169.254.38.121 0000 006C
0022 0000 015B 00AD 016 0016 0016
0016 0016 0041 0016 0016 0016 0016
0016 0016 0016 0016 0016 0041 0016
0041 0016 0016 0016 0016 0016 0041
0016 0041 0016 0041 0016 0041 0016
0016 0016 0016 0016 0041 0016 0016
0016 0016 0016 0041 0016 0016 0016
0016 0016 0016 0016 0041 0016 0016
0016 0041 0016 0041 0016 0016 0016
0041 0016 0041 0016 0041 0016
0622<┘
Y
N
audioon
Enables audio output for Decoder.
Decoder IP
audioon 169.254.104.1<┘
Y
Y
audiooff
Disables audio output for Decoder.
Decoder IP
audiooff 169.254.104.1<┘
Y
Y
dvion
Enables the DVI output of Decoder.
Decoder IP
dvion 169.254.104.1<┘
Y
Y
dvioff
Disables the DVI output of the Decoder.
Decoder IP
dvioff 169.254.104.1<┘
Y
Y
enablehdmiaudio
Enables digital audio output of Decoder.
Decoder IP
enablehdmiaudio 169.254.104.1<┘
Y
Y
disablehdmiaudio
Disables digital audio output of Decoder.
Decoder IP
disablehdmiaudio 169.254.104.1<┘
Y
Y
autohdmiaudio
Detects display support for digital audio
and outputs digital audio if appropriate.
Decoder IP
autohdmiaudio 169.254.104.1<┘
Y
N
cropref
Enables cropping functionality (scaler
must be enabled) to the coordinates
given in the command. X1Y1 are top-left
corner. X2Y2 are bottom-right corner.
Decoder IP, X1Y1,
X2Y2 coordinates
cropref 169.254.104.1 10 10 20 20 <┘
Y
N
getStatus
Returns the current status of the device
in an XML form.
Decoder IP
getStatus 169.254.104.1<┘
Y
Y
N6123 Network Video Recorder Commands
Command
Description
Required Variables
Example
record
Starts a single channel recording. Record description cannot
exceed 250 characters (no special characters are supported).
DVR IP, source IP, record
duration (in minutes),
record description
record 169.254.178.49
169.254.30.238 5 MY
RECORDING<┘
dsrecord
Starts a dual sync recording. Record description cannot exceed 250
characters (no special characters are supported).
DVR IP, source 1 IP, source
2 IP, record duration, record
description
dsrecord 169.254.178.49
169.254.30.238
169.254.23.72 5 MY
RECORDING 1 and MY
RECORDING 2<┘
dvrswitch1
Switches first stream on the DVR to a new selection during a
recording.
DVR IP, new source IP OR
stream number
dvrswitch1 169.254.178.49
169.254.30.238<┘
dvrswitch2
Switches second stream on the DVR to a new selection during a
recording.
DVR IP, new source IP OR
stream number
dvrswitch2 169.254.178.49
169.254.30.238<┘
mpeg
Converts the latest specified stream on the DVR to mpeg. 1 for first
stream (in dual sync recording) 2 for second stream. Bitrate default
is 7500000.
DVR IP, file, bitrate
mpeg 169.254.178.49 latest
1 bitrate:7500000<┘
mpegall
Converts all files on the DVR from a specified timeframe to mpeg.
"24 0" indicates convert all files recorded from time of command
execution back 24 hours.
DVR IP, beginning
timeframe, ending
timeframe, bitrate
mpegall 169.254.178.49 24 0
bitrate:7500000<┘
deletempegfile
Deletes the most recent mpeg file recording on the DVR.
DVR IP, file index to delete
(OR "latest" to delete the
last recorded file)
deletempegfile
169.254.178.49 latest <┘
play
Plays a specific file from a DVR. Start/stop offset in seconds. Offsets
start/stop recording by a specific time from the beginning or end of
the file. Default is 0 0.
DVR IP, file index to play
(OR "latest" to play the last
recorded file), looping, start
offset, stop offset
play 169.254.178.49 latest
noloop 0 0<┘
play 169.254.178.49
f.528E37F2.index loop 0 0<┘
stop
Stops playback on DVR.
DVR IP
stop 169.254.178.49<┘
Decoder Commands (Continued)
Command
Description
Required Variables
Example
N-Series
Support
V-Series
Support