Super Systems CarbCALC II - Manual (Page 20)

CarbCalcII CarbCalc II 19
© 2005,2006,2007 Super Systems Inc.
2.6.2.2 Load History in Control Mode
The Completed Loads Tab may be used to select loads for "Replay". Note: This tab is not available
when a load is active in control mode.
The Completed Load Tab is displays a grid of loads, most recently completed on top.
The "Time In" is stamped when the "Start Recipe" button is pressed and the "Time Out" is stamped
when the load is completed ("unloaded"). These times may be edited on this screen with the
appropriate access level. With appropriate access level, Loads may be edited, added or deleted from
the database using the grid view.
To replay a load, select the load with the arrow indicator and click on the "Set Selected Load" button.
2.6.2.3 Parts in Control Mode
The Parts Tab is used to associate parts with models.