Super Systems CarbCALC II - Manual (Page 13)

CarbCalcII CarbCalc II 12
© 2005,2006,2007 Super Systems Inc.
2.4.3 Segment Properties Dialog
· Segment Name - Enter or Edit the Segment Name.
· Temperature - Enter or Edit the Segment Temperature
· %Carbon - Enter or Edit the Segment %Carbon.
· Probe Factor (PF or COF) - Enter or Edit the Probe Factor. Note: for new segments this will default
to the Suggested PF and may be edited.
· Residual CH4 - Enter or Edit the CH4 (normally 0.0 to 5.0 depending on your furnace).
· Saturation Carbon - displays saturation carbon level, %Carbon should be set to a value less than
this amount.
· Suggested Probe Factor (PF or COF) - Theoretical value of the Probe Factor based on Material
selected.
· End of Segment Method - select the End of Segment type and supply required data as indicated
below.