Super Systems 9210 Series - Manual (Page 6)

M4557 - Model 9210 Nitriding Controller
SSi Manual SERIES 9210-M4557-Nitriding Page 6 of 6
About This Manual
This instrument is designed for Nitriding control and configured per individual customer requirements. This
manual covers the operation of the Model 9210 Nitriding Controller, the Nitriding Control System and the
Gas Flow Panel.
Controller Description
The Model 9210-Nitriding instrument is a multi-loop Proportional Integral Derivative (PID) controller that
can be custom configured to control up to three Nitriding process loops. General features of this product
include:
The Model 9210 is powered by 24 VDC, NOT LINE Voltage. Please be careful when connecting power to
this controller. Connecting anything other then 24 VDC will cause serious damage.
Approximate Box Dimensions 2.75" x 4" x 4.5"
Power Requirements 24VDC, 4 Watts
Digital Output Rating 300VAC / 1 AMP
Analog Output Load Rating 1000 Ohms (Total)
Controller Enclosure Rating IP10 – hand protected
Number of RS232 Ports Two (2)
Number of Ethernet Ports One (1)
Number of RS485 Host Ports One (1)
Number of RS485 Slave Ports Two (2)
Number of Internal Relays Eight (8)
Number of Analog Inputs Three (3)
Number of Analog Outputs Two (2)
Number of Digital Inputs Four (4)
Number of Control Loops Three (3)
The control enclosure is powered by 120 VAC, Single Phase, 60 Hz (Line Power). Line voltage for the
isolation relays comes from the same source.
!