Super Systems 9210 Series - Manual (Page 57)

M4557 - Model 9210 Nitriding Controller
SSi Manual SERIES 9210-M4557-Nitriding Page 57 of 57
2.8 Speed of Response
Typical T90 for combustion gas application is 30 seconds.
2.9 Power Requirements
Voltage: 24Vdc +/- 5%
Power: 10W
2.10 Gas Connection
The standard connections are captive seal compression fittings suitable
for 0.25" (or 6mm) diameter tube on the sample inlet and sample outlet. The tubing must be
sturdy enough to withstand the slight compression applied by the tightened coupling. Metal, nylon
or other rigid plastics are suitable. Rubber, PVC etc. are only suitable if a supporting insert is used.
See figure 1 for inlet / outlet
78
Figure
2:
Sensor
4.0 CALIBRATION