9 technical support, 10 support packages, 11 physical properties – Sundance SMT791 User Manual
Page 22: Technical support, 10 support packages 11 physical properties, Figure 16: internal power supply voltages
A+3V3
Derived from D+3V3_IN
VCO+5V0
Derived from D+5V0_IN
VCO+12V0
Derived from D+12V0_IN
ECL-5V2
Derived from D-12V0_IN
AGND
Derived from DGND
Figure 16: Internal Power Supply Voltages.
9 Technical Support
10 Support Packages
The SMT791 is supported by a firmware package with software and VHDL routines
enabling the user to customise or use “as is” the system.
The Host software must be developed using the SMT7026.
The demo GUI provides an easy-to-use interface to validate the system, but it is
recommended to customise it and/or to develop your own host and firmware to
meet your requirements.
All sources are provided to help you with your development.
The following board support packages are mandatory to use the SMT791:
•
Driver package with support for the SMT700 carrier board,
•
h programming utility tool for FPGA-only modules.
11 Physical Properties
Dimensions 63.5mm
106.68mm
Weight TBD.
Supply Voltages
Supply Current
+12V
TBD
+5V
TBD
+3.3V
TBD
-5V
TBD
-12V
TBD
MTBF
It is recommended to use cooling fans, or other efficient cooling system.
User Manual SMT791
Page 22 of 22
Last Edited: 12/10/2010 09:52:00