Sundance SMT387 - Manual (Page 33)

Version 1.0.3 Page 33 of 42 SMT387 User Manual
Discs
You can select the discs to use by clicking IDE 0 and IDE 1. The discs will be used
as follows:
IDE 0 Use only the disc connected as IDE 0.
IDE 1 Use only the disc connected as IDE 1.
IDE 0 & IDE 1
Start using the disc connected as IDE 0. Once that is full
(for Record) or has been read to the end (Playback), the
selected operation will continue using IDE 1.
The setting will be changed automatically if the DSP reports it can only find one disc.
Information
The window at the bottom right of the display is used to show various status and
error messages.
Status
The user interface displays information about each disc in the system.
Capacity The size of the disc report by the controller.
Recorded The amount of information that has been written to the discs.
Playback Record: the percentage of the disc that has been written.
Playback: the percentage of the recorded data that have been
read.
Rate The current rate at which data are being transferred.
Further details
Please consult the documentation included with the SMT6087 package for details on
the internals of this software.