Sundance SMT387 - Manual (Page 31)

Version 1.0.3 Page 31 of 42 SMT387 User Manual
Running the Example
The example is executed by running Logger.exe. This resets the DSPs, loads them
with Logger.app, and starts them running. It assumes that Logger.app is in the
same directory that contains Logger.exe. Note that it takes a few seconds to reset
the SMT387.
User Interface
Once the DSPs have been successfully started running, the following window will
appear:
The top five buttons are:
Playback
Start transferring data from the discs to the SDBs. The
transfer will stop once all the written data have been
moved.
Playback to file Ask for an output file name and start transferring data from
the discs to that file. The transfer will stop once all the
written data have been moved.
Record Delete any existing data on the discs and start transferring
new data from the SDBs to the discs. The transfer will
stop once all the available space on the discs has been