Sundance SMT317 - Manual (Page 20)

Version 6.1 Page 20 of 24 SMT317 User Manual
16.2. JMP2: SDB Clock speed select and external trigger
• SDB Clock speed select:
JP1 JP2 JP3 CLK (MHz)
IN N/A N/A 50
OUT N/A N/A 100
Table 3: Clock speed selection
• External trigger
JP2 is used to apply the external trigger signal.
The trigger signal is different depending of the mode selected:
• In burst mode, the trigger is an edge.
• In
continuous mode, the trigger is a level.
The user has to make sure he inputs the right external trigger signal according
to the mode selected.