Studio Technologies 58 2000 - Manual (Page 31)

Issue 4, December 2000 Model 58/59 User Guide
Page 32 Studio Technologies, Inc.
for Surround
Press and hold an input
button (one at a time) to
display and select which
channels associated with
that input are active.
Model 59 Configuration—Input Channels Active
When an input button is pressed, these LEDs
display which input channels are active for that
input. A lit LED indicates that the channel is
active. Use the buttons to change the configura-
tion. All LEDs flash when all input channels are
configured for inactive.
Default: For all four inputs, all eight channels are active.
Note: A special input disable function is available. By disabling all channels associated with a specific input,
that input will no longer be available during normal operation. While in the configuration mode, all 8
mute/solo mode LEDs associated with an input will flash to indicate that the input has been disabled.
This function is useful if an input is not going to have a source associated with it. During normal
operation a disabled input cannot be selected, minimizing user confusion that could be caused by
selecting an invalid input source.
&