Studio Technologies 230 2014 User Manual

Page 24

Issue 9, November 2014

Model 230 User Guide

Page 24

Studio Technologies, Inc.

Talkback 2 Function Mode
Switches SW3-7 and SW3-8 conﬁgure the

overall operation of the talkback 2 button.

Figure 12. Talkback output 1 function mode

settings

Talkback 1 Function Mode
Switches SW3-5 and SW3-6 conﬁgure the

overall operation of the talkback 1 button.

Four modes are available:
• Disabled: In this mode the talkback 1

button is disabled. The exception is if

the auxiliary relay is conﬁgured to follow

the status of the talkback 1 button. In

this case the button will control the re-

lay; no other functions will be impacted.

• Talk to talkback output: In this mode the

talkback 1 button will control the routing

of audio to the line-level talkback output.

• Talk to intercom interface pin 2: In this

mode the talkback 1 button will control

the routing of talkback audio to pin 2 of

the intercom interface. Pin 2 is channel 1

of an RTS TW intercom system.

• Talk to intercom interface pin 3: In this

mode the talkback 1 button will enable

the routing of talkback audio to pin 3 of

the intercom interface. Pin 3 is channel

2 of an RTS TW intercom system. For

a single-channel Clear-Com intercom

system it will be channel 1.

Figure 13. Talkback output 2 function mode

settings

Four modes are available:
• Disabled: In this mode the talkback 2