Space Ray ETS Series - Manual (Page 51)

Form 43343300
-50- May 2013
24.2)
REMOVING MAIN BURNER AND GAS VALVE
4
3
1
2
5
5
ETS/ETU 40-75 Models
ETS/ETU 40-75 Models ETS/ETU 40-75 Models
4
3
6
6
1.
Disconnect electrical supply and gas connection at the restrainer nipple.
2.
Open the access panel and disconnect the wires from gas valve.
3. Remove the burner clamp and screws.
4. Remove the burner and gas valve assembly from the cabinet.
5. Unscrew the burner from the manifold.
6. Check the orifice. If the gas valve is to be replaced, the pipe joint compounds must be resistant to the action
of liquefied petroleum gases.