beautypg.com

Programming the 844 sprayer control system – Smithco Spray Star 1607P (1999) Operator Manual User Manual

Page 25

background image

23

Operation

PROGRAMMING THE 844 SPRAYER CONTROL SYSTEM

(

CONTINUED

)

NOZZLE SELECTION

Default = Red or 0.40 GPM

1. While in the nozzle selection step, the display will remain the same as above except the

!

symbol will

be flashing at the bottom of the display just above a color coded strip.

The tabbed color strip along the bottom of the display represents color coding for
TeeJet VisiFlo spray tips.

2. Select the representative color to match the spray tips being used to apply the desired application rate.

Use the

or

keys to toggle the

!

key through the tabbed color strip at the bottom of the

display panel. The corresponding flow rate for each color will be displayed in Gallons Per Minute at 40 psi

at the lower right of the display. If the programmable tip is the used, toggle the

!

key to the

P

tab.

Flow rates will always be displayed in Gallons Per Minute at 40 psi regardless of any changes to other
display parameters.

3. The table below indicates flow rates in Gallons Per Minute at 40 psi for the TeeJet VisiFlo color coded

spray tips represented in the 844 Spray Control.

Color coding of spray tips is not uniform from manufacturer to manufacturer. Flow rates

for all nozzles should be checked prior to use. Tips that are worn should be replaced to

ensure an accurate application rate.

4. Feature: Based on the tip programmed and nozzle spacing, the 844 console will calculate the required

speed to achieve the application rate that was entered in the last programming step. The speed will be
displayed in the lower left corner of the display window. Keep in mind that this speed is based on a
spraying pressure of 40 psi. More calculations can be performed in the next programming step.

5. When the correct flow rate for the spray tips being used has been entered, depress the

key to

accept the value and advance to the next step.

TeeJet

®

VisoFlo

®

Tip Color

Flow

Rate in

GPM @

40 psi

Orange

0.10

Green

0.15

Yellow

0.20

Blue

0.30

Red

0.40

Brown

0.50

Gray

0.60

White

0.80

Lt. Blue

1.00

Lt. Green

1.50

Black

2.00

This manual is related to the following products: